If you need installation instructions, scroll down below.

NOTE: In 2018 Ray Allen Company transitioned to solid color, 24 gage wire.

ORDERING RAY ALLEN COMPANY PRODUCTS.

You can print out the .pdf order form on the right and FAX, Email or mail it to us.
NOTE: We accept VISA or Mastercard only.


Ray Allen Company, 1341 Distribution Way Suite 15, Vista, CA 92081 USA.
Phone 760 599 4720 Fax 760 599 4383

Please feel free to call us. Our knowledgeable staff will be more than happy to assist you!

For more information on RAC trim applications, please review our applications and links page.

For general information, see our FAQ's page.







Order form
1 page



Need instructions? Feel free to download what you need here.

NOTE: In 2018 Ray Allen Company transitioned to solid color, 24 gage wire.

Trim system installation instructions. (click here for 2017 and older trim systems installation instructions)
Includes installation instructions for the T2/3 servo, RS2 rocker switch, RP4 indicator and RC8-7 clevis/pushrod assembly. 4 pages


G101 stick grip wiring instructions. (click here for 2015 and older G101 wiring instructions)
If you are using a G101 stick grip, you'll need this. 1 pages



G205/207 stick grip wiring instructions.
If you are using a G205/207 stick grip, you'll need this. 8 pages


G301/303 stick grip wiring instructions.
If you are using a G301/303 stick grip, you'll need this. 4 pages


G305/307 stick grip wiring instructions.
If you are using a G305/307 stick grip, you'll need this. 8 pages

G4 stick grip wiring instructions.
f you are using any G4 stick grip, you'll need this. 3 pages

RS2 wiring instructions***.
These instructions are for using the RS2 rocker switch to control the RAC servos.
***Also includes instructions on modifying the RS2 rocker switch for use with a REL-2 relay deck. See below for detailed REL-2 installation instructions. 3 pages


REL-2 servo relay deck installation instructions. (click here for 2017 and older REL-2 wiring instructions)
Includes separate wiring diagrams for use with ROS-4 4-way switch and G2/G3/G4 stick grips. 2 pages


***********Do It Yourself Relay Deck instructions.
If you want to make your own relay deck, use this wire diagram. 1
page


RP4 LED indicator installation instructions. (click here for RP3 LED Indicator instructions)
1 pages


POS position sensor installation instructions. (click here for POS 2017 and older instructions)
1 pages


************SPD-1 servo speed control cut-out switch wiring diagrams.
Refer to these wiring diagrams if you want to cut out your speed control at slow speed. 2 pages

Trim Tab Travel computer
A document that quickly estimates total arc of travel at the trim tab given variables such as servo strokes and control arm lengths.Very helpful if you are designing your own trim system.
1 page


**********Two RS2 rocker switches special wiring diagram.
If you want to use two RS2 rocker switches to control one servo, you'll need diodes wired in line between the RS2 and a REL-2 relay deck (see below for detailed REL-2 installation instructions). This download also includes how you can rewire the inside of your RS2 rocker switch if you do not have or want to use diodes. 2 pages


**********Two servos/one RS2 rocker switch special wiring diagram.
If you want to control two servos using one switch, read this first. 1 page


RAY ALLEN HOME PAGE / ELECTRIC TRIM SYSTEMS / SERVOS / STICK GRIPS / INDICATORS & SENSORS /
SWITCHES / RELAYS, WIRE, WING WALK, ETC. / ORDERING AND DOWNLOADS / APPLICATIONS / FAQ'S