RP3 ... LED TYPE POSITION INDICATOR

This LED meter is designed to be installed in the cockpit and give an indication of the servo output shaft position. The 10 LEDs are the brightest available for superior visibility in sunlight, but can be dimmed for night flight. It can be installed horizontally or vertically. Its faceplate measures 1.75”(45 mm) X .75”(19 mm) and it is 1.05”(27 mm) in depth. It is the standard position indicator included in Ray Allen trim systems, or can be purchased separately for special applications such as a cowl or wing flap indicator. $95 NOTE: see below for faceplate label choices.

RP2 ... NEEDLE TYPE POSITION INDICATOR

This analog meter is designed to be installed in the cockpit and give an indication of the servo output shaft position. It can also be purchased separately for special applications such as a cowl or wing flap indicator. The faceplate measures 1.75”(45 mm) X 1.0”(26 mm) and it is 1.8”(48 mm) in depth. It can be installed horizontally or vertically. $109 NOTE: see below for faceplate label choices.

POSITION INDICATOR / ROCKER SWITCH LABELS

Finish your Ray Allen trim installation with these high quality labels. The labels are lexan coated for long service life and are die cut for a precise fit. They are available at no charge at the time of purchase. Otherwise, please send us a self addressed, stamped envelope indicating which labels you require. They come in the following styles: NOTE: Ray Allen rocker switches and needle type indicators require a LARGE label. Ray Allen LED indicators use a SMALL label.

RUDDER

AILERON

ELEV 1

ELEV 2

WING FLAP

COWL FLAP

GWL-1 ... GEAR WARNING LIGHTS

This 6 light indicator is designed to be installed in the cockpit and give an indication of the landing gear position. The lights are high intensity LED's and are inset to provide maximum visibility in bright sunny conditions. The three top lights are YELLOW and the three bottom lights are GREEN. Six wires as small as 26 gage connect the lights directly to the gear safe/unsafe switches (not included). The faceplate measures 1.35”(34 mm) X 1.75"(45 mm) and it is 1.5”(38 mm) in depth. Ray Allen gear warning lights come with label pre-installed. GWL-1 $99 This indicator is also available with BLUE top lights for SEAPLANE useage. GWL-1B $99

POS-5, POS-7, POS-12 ... POSITION SENSOR

When combined with a Ray Allen indicator, this sensor can be used to measure the position of wing flaps, cowl flaps or many other mechanisms. (NOTE: Ray Allen T2 and T3 servos have their own built in sensors.) Measuring only 2.7”(69 mm) x .5”(13 mm) x .8”(20 mm) , it's small enough to be installed almost anywhere. It is available in the following travel lengths: .5”(13 mm), .7”(18 mm) and 1.2"(30 mm). $35

RAY ALLEN HOME PAGE / ELECTRIC TRIM SYSTEMS / SERVOS / STICK GRIPS / INDICATORS & SENSORS / SWITCHES / RELAYS, WIRE, WING WALK, ETC. / ORDERING AND DOWNLOADS / APPLICATIONS / FAQ'S