RS2 ... ROCKER SWITCH

This switch is designed for use with Ray Allen trim systems. It has a very positive snap action in two directions and returns to a center off position. The switch is rated at 1 amp. When used exclusively, this rocker switch does not need relays to operate Ray Allen servos. Its faceplate measures 1.75” (44 mm) X 1.0” (25 mm) and it is 1.47” (37 mm) in depth. A label is available for this switch. See the indicator page for details. The RS2 rocker switch is included with Ray Allen trim systems, or can be purchased separately.

$26

Ray Allen also has available the above rocker switch rated at 5 amps (RS2-5) for heavier duty applications such as electric flaps.

$28

Rocker switch



ROS-4 ... 4-WAY SWITCH


all dimensions are in inches
4-way switch drawing
4-way switch
This compact OTTO multi-action switch can be installed inside your control stick grip to activate both elevator and aileron trims. Your thumb pressure in any direction is all that is needed to change the trim settings. This switch has a SPST action so it must be used in conjunction with a REL-2 relay deck (or equivalent) to operate Ray Allen servos. It is rated at 1 amp.

$80




RBS SERIES... BEZEL SWITCHES

Bezel Switch Label sheet
Ray Allen Bezel Switches are available in a toggle or a momentary contact pushbutton function. They make an excellent addition to any instrument panel. The bezel was designed to integrate a professional appearing label near the switch. The bezel measures 1.25" (32 mm) x 1.35" (34 mm). The die-cut label sheet shown at right (RBS-L1) is purchased separately. All Bezel Switches are SPST. They have screw terminals and are rated at 15 amps. Specify RBS-T11 for toggle action or RBS-P11 for momentary pushbutton action when ordering.

$19

Bezel Switch

The RBS-L1
contains over 40 different die-cut, lexan coated labels.
$5

RBS-T11 pictured




RBS-GS ... BEZEL GEAR SWITCH



Bezel Gear Switch
The Ray Allen Gear Bezel Switch is the same custom bezel as above combined with a high quality SPDT retract gear toggle switch. The switch is rated at 15 amps and has a pull to unlock feature preventing accidental engagement.

$79



RAY ALLEN HOME PAGE / ELECTRIC TRIM SYSTEMS / SERVOS / STICK GRIPS / INDICATORS & SENSORS /
SWITCHES / RELAYS, WIRE, WING WALK, ETC. / ORDERING AND DOWNLOADS / APPLICATIONS / FAQ'S